Weiss DAC50x Multi-Band Parametric Equalizer

  Weiss DAC501 and DAC502 EQ

 

Equalization EQ is the most influence sound quality parameter from recording to playback. From Weiss BW102 mastering system to Gambit EQ1-MK2 (graph below), Weiss Engineering has been the top digital equalizer manufacturer in the pro audio industry. In some ways, you must have listened some records or live concerts that are processed by Weiss EQ.

Weiss DAC50x built in two different types of precision digital equalizers. 1) Multi-Band Parametric Equalizer & 2) Room EqualizerThese mastering grade EQs are running in extremely high precision (40bit floating point /195.3kHz) that will alternate sound quality nor decrease your source transparency like other tradition analogue/digital eqs.

In this article we will share different filter types and their functions.

EQ window
X-axis is frequency in Hz (from low 20Hz – high 20,000Hz)
Y-axis is amplitude dB. 0dB in the middle (yellow line), above 0dB is boost, below is reduction.

When turn up or down volume, it changes the yellow line includes ALL frequencies. EQ however alternates specific section of frequency. This allows user to shape the audio spectrum balance as desire.

DAC50x Parametric Equalizer control: 

  1. EQ Type – There are 6 Options. 1) Bypass 2) Low Shelf 3) High Shelf 4) Peak 5) Low Cut 6) High Cut.

  2. Frequency – The selected frequency to apply equalization.

  3. Gain – Boost or Reduce the selected frequency range.

  4. Q – EQ covers bandwidth.

This article is tailor for audiophile using Weiss DAC50x in playback situation. All parametric equalizers have these settings. BTW, the term “Parametric Equalizer” was invented by famous engineer George Massenburg. His original AES paper which was published on May 1972 is now Open Access for public. Here is the history written by George himself. Audiophile should be well aware George master engineering works for Jennifer Warnes “The Famous Blue Raincoat” and “Hunters” records.

Example 1: LOW SHELF filter +10dB @ 100Hz 

Low Shelf filter affects from the selected frequency DOWNWARD. This example Low Shelf filter boost 10dB from 100Hz downward.

Example 1-2: LOW SHELF filter +10dB @ 1,000Hz 

Low Shelf filter boost 1,000Hz downward, the whole green colour area is boosted +10dB. Low Shelf filter affects very broad bandwidth and therefore it is usually target at the low frequency range. Although it depends on different speakers/brands/room matching, I would suggest for bookshelf speakers the Low Shelf filter starts around 100-180Hz and for large floor standing speakers around 70-110Hz. You can view this Low Shelf filter as “BASS” control.

Example 1-3: LOW SHELF filter -10dB @ 300Hz 

Low Shelf filter is set from 300Hz going downward, the whole green colour area is reduced -10dB. With an equalizer, you can boost or cut the frequency region. Low Shelf filter is frequently used when bass region is too strong or not enough.

Example 2: HIGH SHELF filter +10dB @ 3,000Hz 

High Shelf filter is opposite of Low Shelf filter, it affects from the selected frequency UPWARD. This example High Shelf filter (blue area) boost +10dB from 3,000Hz.

Example 2-2: HIGH SHELF filter +10dB @ 1,500Hz 

High Shelf filter boost 10dB from 1,500Hz upward. Normal two ways speaker design, this shelf filter is close to boosting the tweeter output since it affects the whole frequency range above 1500Hz.

Example 2-3: HIGH SHELF filter -10dB @ 1,500Hz 

High Shelf filter reduced 10dB from 1,500Hz upward. This is opposite from Example 2-2, With such equalizer, you can reduce the tweeter output, result is less high frequency reproduction.

Example 3: LOW CUT filter @ 40Hz 

Low Cut filter rolls off from the selected frequency downward. This example Low Cut filter is set from 40Hz, the red colour area is remain. This is useful to filter out the sub sonic rumbling. For bookshelf speakers setup, this Low Cut filter can relax your amplifier and may result a better bass or overall performance!

Example 4: HIGH CUT filter @ 9,000Hz 

High Cut filter rolls off from 9,000Hz upward, the purple area is the output section. For normal stereo system, you should not need high cut EQ at 9,000Hz because you will lose all information above this setting. High Cut filter is very useful for recording, but not that usual for playback. High Cut filter however is essential for sub-woofer since it limits subwoofer output to match with main stereo speakers.

Example 5: LOW SHELF +10dB @ 100Hz and HIGH SHELF filters +10dB @ 3000Hz 

This example uses both Low Shelf and High Shelf filters together.
Low Shelf filter is set from 100Hz going Downward (Green Colour) is boosted +10dB.
High Shelf filter is set from 3000Hz going Upward (Blue Colour) is boosted +10dB.

Example 6: PEAK filter -10dB @ 300Hz Q=1

Peak filter sometimes is called Bell (the shape of the EQ area). This is most common and flexible EQ filter curve. This example Peak filter boost 10dB at 300Hz and gradually with a slope downward and upward. (Green colour) area with bandwidth Q=1, EQ boost affected from 30Hz to 3000Hz. Q setting allows you to set the bandwidth to be alternated by EQ.

Example 7: PEAK filter -10dB @ 300Hz Q=1

Reverse example the Example 6. Same Peak filter frequency and Q, but Gain reduces 10dB. This (Green colourarea is reduced with bandwidth Q=1, it means the Peak filter set at 300Hz, EQ reduction from 30Hz to 3000Hz. Q setting allows you to set the bandwidth to be alternated by EQ. This shows Peak filter even center frequency is set at 300Hz, the slope of the EQ (bell shape) is still affecting other frequency depends on the Q value.

Example 8: PEAK filter -10dB @ 300Hz Q = 10

Peak filter center Frequency (300Hz) and Gain (-10dB) are the same, but Q = 10. This (Green colourarea is much narrower than last few examples. With Q=10, if Frequency set at 300Hz, EQ reduction between 130Hz to 700Hz. Q setting allows you to set the bandwidth. Q=10 is a much sharper EQ curve than Q=1.

You may find in DAC50x default Peak Filter Q=1.4. If you know music scale, Q=1.4 translates to 1 octave.

Q 0.7 = 2 octaves
Q 1    = 1 1/3 octaves
Q 1.4 = 1 octave
Q 2.8 = 1/2 octave
Q 4.3 = 1/3 octave
Q 8.6 = 1/6 octave

Frequency Range

Frequency Values

Sub-bass

20 to 60 Hz

Bass

60 to 250 Hz

Low midrange

250 to 500 Hz

Midrange

500 Hz to 2 kHz

Upper midrange

2 to 4 kHz

Presence

4 to 6 kHz

Brilliance

6 to 20 kHz

Audiophile usually have a sense of frequency ranges that separation in audio spectrum. These ranges relates to speaker crossover designs. 2 Ways speakers usually crossover around 2,000Hz. 3 Ways speakers usually crossover around 300Hz and 3,000Hz. By using DAC50x Multi-Band Parametric Equalizer, one can re-adjust your system frequency balance with the highest sonic fidelity.

Human listening is not linear, we are more sensitive to 2kHz to 5kHz than the rest of the spectrum. The famous Fletcher–Munson curves and updated equal-loudness contours shows our ears sensitive varies in different loudness level. For example at late night listening your high end audio system in low level (SPL ~ 60dB), you usually do not get as much bass/high freq. compare to normal listening level ~90dBSPL. Before we introduce the loudness DSP, you may use Weiss DAC50x presets 1 of 12 as night mode. When you listen with low loudness level, you use this preset to boost your bass and high frequencies.

Weiss DAC50x Parametric Equalizer can adjust high end audio system much more effective than any tuning accessories. Once you master the EQ techniques, you can fine tune the sound exactly as you like. I hope you enjoy this article and happy listening. Next article we will focus on the Weiss DAC50x Room Equalizer function.

After this series of articles, in late October I plan to run an event to demonstrate these topics to you. If you are interested just drop a comment to save a seat. Any Weiss DAC50x owner will be free admission.


Kent Poon is a recording producer, engineer and entrepreneur. He founded and managed "Square Wave" group distributes over twenty high end consumer and pro audio brands in Asia region and multiply direct retail stores. He involves in HiRes Immersive audio and new streaming platform "Artist Connection". Kent is CTO of "Montreux Jazz Festival China" (MJFC). He is co-founder records label "Jazz World Records". Here is a private place where he writes freely about his audio lifestyle.